What is the name of the strap worn by the electronics factory?

Detailed introduction of anti-static wrist strap

The anti-static wrist strap is used to discharge the static electricity of the human body. It consists of anti-static elastic bands, movable snap buttons, and spring cords. Composed of protective resistors and plugs or collets. The inner layer of the elastic band is woven with antistatic yarn, and the outer layer is woven with ordinary yarn. Main indicators The maximum length of the spring cord is 250cm, the leakage resistance is 106Ω (the protection resistance is 106Ω). Detailed introduction of corded and cordless anti-static wrist straps, electrostatic ring wired wrist straps (anti-static) wireless electrostatic wrist straps, and anti-static wrist straps Wireless electrostatic wrist straps are based on the physical principle of (static voltage balance) based on " In electrostatic engineering, "static electricity is developed by using the principle of pushing between ions. By virtue of the characteristics of static electricity pushing from high electricity to high potential, the static electricity of the human body is pushed to the design of the drought body (collection area), Through [the principle of charge induction], the front and back surfaces of the conductive plate will be respectively charged with "equal and opposite charges" - the skin effect. Since there is an ion exchanger in the area <utilizing its low ion energy characteristics>, it can easily provide the imported Static ions are used to neutralize the opposite charges, so the effect of static discharge can be achieved. In addition, there is a screw on the outside of the machine to connect with the internal conductor circuit.